[mXm] BalzOnYer4Head Posted May 2, 2012 Report Share Posted May 2, 2012 As promised and smartly recommended by Andy, here are the pics. I took as many as I could without annoying the dude and I will try to describe the process as best I can. Took about three hours, just need my optics now. Lower receiver blank Barrel Gas Tube, Upper Receiver parts, hand gaurds, bolt carrier, misc parts Tool set Getting started! Started with the lower receiver first. Taped up the metal to avoid dinging it when setting in the roll pins. This is the bolt catch that locks the bolt to the rear. Trigger group. This is the upgrade I got for free because they had to cancel the first class. Nickel Carbon plated trigger, hammer, and bits. Setting the trigger spring. Just pulled it over the circular ears. Dropping it into the lower receiver Hammer and spring Together with the trigger and other bits. Fairly simple, just a few retaining pins and whacks with a hammer. Another part of the upgrade, the little diagonal bar keeps the pins from rolling and possibly falling out, causing your trigger group to fall apart. (This is not a common issue, but it was free, so why not) Upgraded trigger gaurd Trigger housing group complete with upgraded ergo hand grip. Its got a nice comfortable grip and it is rubberized, so not hard plastic. Locking plate for the buffer spring tube Buffer spring tube attached to lower receiver Collapsible stock Upper receiver attached to the barrel, and bolt carrier group. From here it was a little more complicated and I couldn't really take pics of what was going on. There is a gas tube, small metal tube that runs from between the front sight post in the pic above, to the "delta ring" that is right in front of the hand guards in the same pic. There were three holes that had to be lined up for the tube to slide in, and had to use a special tool to align the last bit, as it sits in a vice. From there it was just a matter of putting the charging handle in the upper receiver, and the bolt carrier group, slap on the hand guards, flash suppressor and attach the upper receiver group to the lower receiver. I had a ton of fun building it, the class also came with the carrying bag, cleaning kit and a tshirt. Quote Link to comment Share on other sites More sharing options...
[mXm] andy19 Posted May 2, 2012 Report Share Posted May 2, 2012 Didn't know it was a course, that's cool. Nice that they guide you through it. Was it this one? (quick Google search) Quote Link to comment Share on other sites More sharing options...
[mXm] JerZ Posted May 2, 2012 Report Share Posted May 2, 2012 my brother has that rifle, it's a beaut'. It's a bit heavy but it's sexy. Quote Link to comment Share on other sites More sharing options...
[mXm] BalzOnYer4Head Posted May 2, 2012 Author Report Share Posted May 2, 2012 @ Andy. Yes sir. That is the company and class. The guy new his stuff too. @ JerZ, sooooooo sexy. Quote Link to comment Share on other sites More sharing options...
[mXm] Colt_Seavers Posted May 2, 2012 Report Share Posted May 2, 2012 Wow that's awesome Balz Quote Link to comment Share on other sites More sharing options...
Aranki Posted May 2, 2012 Report Share Posted May 2, 2012 Goddamn, man. I think I got a stiffy. That's beautiful. Now you need to take that puppy out to the range! Quote Link to comment Share on other sites More sharing options...
[mXm] BalzOnYer4Head Posted May 2, 2012 Author Report Share Posted May 2, 2012 Now I just need to get the mXm emblem etched on to the lower receiver. Quote Link to comment Share on other sites More sharing options...
[mXm] kotaco Posted May 2, 2012 Report Share Posted May 2, 2012 Nice I recognize that spider logo from somewhere, or one similiar to it. Anyhow, I like it, our PD uses em and they just feel great when clearing rooms and operating in a stack. I played with one during my SWAT Medic class, but what I used the majority of the time was the M4 (LE Model) Quote Link to comment Share on other sites More sharing options...
[mXm] BalzOnYer4Head Posted May 2, 2012 Author Report Share Posted May 2, 2012 I have obviously thinking of upgrades. The optics I have figured out: http://www.valhallaarmory.com/3_9X42_Ultimate_AR_15_Scope_p/st3942gdmod1.htm I am also going to switch from the hand guards to a free floating rail system. I want a front grip, but that's all I really want. If anything else it would be a good high lumen flashlight. I just don't want it to get too bulky. I would also not do anything like that wild "camo" scheme on that M4 in the picture Unit posted. I will definitely update the thread as I go along. Quote Link to comment Share on other sites More sharing options...
[mXm] andy19 Posted May 2, 2012 Report Share Posted May 2, 2012 I can't believe how inexpensive they are down there. They go from $1300-1600 up here. It's such a nice rifle though. Very smooth, very little recoil. If you can't get tight groupings, there's something wrong. Balz, definitely keep this thread updated as you go. It'll look awesome with a front grip and those optics. Quote Link to comment Share on other sites More sharing options...
[mXm] gordy Posted May 4, 2012 Report Share Posted May 4, 2012 That is pretty awesome balz i love ar-15s...i just wish i had the money to buy/build one myself. Quote Link to comment Share on other sites More sharing options...
[mXm] weathermatt Posted May 5, 2012 Report Share Posted May 5, 2012 Here you go Randy, now work on this. Apparently all you need is a PS3 Blue Ray Drive. - http://www.coasttocoastam.com/photo/category/most-recent/#57342/Man-Builds-Star-Trek-Phaser Aranki 1 Quote Link to comment Share on other sites More sharing options...
Aranki Posted May 5, 2012 Report Share Posted May 5, 2012 That's insane, matt. lol Quote Link to comment Share on other sites More sharing options...
[mXm] kotaco Posted May 5, 2012 Report Share Posted May 5, 2012 [quote name='weathermatt' timestamp='1336193039' post='2050'] Here you go Randy, now work on this. Apparently all you need is a PS3 Blue Ray Drive. - http://www.coasttoco...tar-Trek-Phaser I wonder what will happen if you look directly at the laser. Quote Link to comment Share on other sites More sharing options...
[mXm] andy19 Posted May 5, 2012 Report Share Posted May 5, 2012 [quote name='kotaco' timestamp='1336245442' post='2055'] I wonder what will happen if you look directly at the laser. You'll see everything in 1080p kotaco, weathermatt and BalzOnYer4Head 3 Quote Link to comment Share on other sites More sharing options...
[mXm] BalzOnYer4Head Posted May 5, 2012 Author Report Share Posted May 5, 2012 [quote name='andy19' timestamp='1336249058' post='2056'] You'll see everything in 1080p LOL @ Andy I seen that. It looks pretty easy to do, but I am terrible at soldering. Just big globs of molten metal everywhere. I could see uses for it at work. They are always putting up balloons for some damn thing or another, and I could just see the looks on peoples faces when I pulled that out, fired a laser that popped a balloon! I would definitely be fired, and would have to prove that it wasnt a weapon, as to not be arrested as well. AHAHAHAHA Just walk through the floor like a madman but instead of going postal on people, I have a LASER going postal on balloons. Fired for sure, that would be a last day I won the lottery kinda stunt. weathermatt 1 Quote Link to comment Share on other sites More sharing options...
[mXm] kotaco Posted May 6, 2012 Report Share Posted May 6, 2012 [quote name='BalzOnYer4Head' timestamp='1336260046' post='2057'] LOL @ Andy I seen that. It looks pretty easy to do, but I am terrible at soldering. Just big globs of molten metal everywhere. I could see uses for it at work. They are always putting up balloons for some damn thing or another, and I could just see the looks on peoples faces when I pulled that out, fired a laser that popped a balloon! I would definitely be fired, and would have to prove that it wasnt a weapon, as to not be arrested as well. AHAHAHAHA Just walk through the floor like a madman but instead of going postal on people, I have a LASER going postal on balloons. Fired for sure, that would be a last day I won the lottery kinda stunt. If you could do it without being seen, just a quick shot and pop, t it'd be pretty funny. Quote Link to comment Share on other sites More sharing options...
[mXm] kotaco Posted May 12, 2012 Report Share Posted May 12, 2012 I remember where I saw that logo now: http://seasnipers.net/forums/showthread.php?t=12892 :) Quote Link to comment Share on other sites More sharing options...
[mXm] BalzOnYer4Head Posted May 12, 2012 Author Report Share Posted May 12, 2012 I have ordered my upgrades! I have purchased a bottom rail mount, front grip, 3x9 scope, red dot sight, extra magazine, and a tactical sling. I got it all from this place called AR15Outfitters.com. I will snap some pics, before and after once it all arrives. One step closer to gettin this thing on the range and zero'd! kotaco and andy19 2 Quote Link to comment Share on other sites More sharing options...
[mXm] andy19 Posted May 12, 2012 Report Share Posted May 12, 2012 Now all you need are a couple of these bad boys and you'll be all set. Quote Link to comment Share on other sites More sharing options...
[mXm] BalzOnYer4Head Posted May 12, 2012 Author Report Share Posted May 12, 2012 They had some of those Zombie splatter targets, I seriously thought about picking up a pack but felt I had already spent enough. Quote Link to comment Share on other sites More sharing options...
[mXm] andy19 Posted May 12, 2012 Report Share Posted May 12, 2012 It's too bad here in Canada you can't (legally) shoot anything that represents a human. Even if it is the living dead. Although if you're shooting on private property I'm sure you can get away with it. Quote Link to comment Share on other sites More sharing options...
[mXm] BalzOnYer4Head Posted May 23, 2012 Author Report Share Posted May 23, 2012 Upgrades!!! Before: After! Red Dot Scope reticule can be it red... Or Green. Sexy time Still waiting on the lower rail assembly to come in, and than I can add my front grip. Hoping to get it to the range next Friday. I also got a Ghost Recon Pin for preordering. Made use of it! Quote Link to comment Share on other sites More sharing options...
[mXm] DangerSullivan88 Posted May 25, 2012 Report Share Posted May 25, 2012 Dude, that's freak'n sweeeet!!! Quote Link to comment Share on other sites More sharing options...
[mXm] BalzOnYer4Head Posted May 25, 2012 Author Report Share Posted May 25, 2012 Thanks man! We are going shooting next Friday morning. You can certainly come along! Quote Link to comment Share on other sites More sharing options...
Self-proclaimed experts in tactical gaming since 2004
Self-proclaimed experts in tactical gaming since 2004
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.